How to paint motorcycle helmets to look attractive [Step By Step Guide 9]

Motorcycling is an awesome hobby. A high speed ride feels thrilling as the wind whips against you, the machine throbbing beneath you. Helmets play a major role in defining your personality and attitude. Helmets should reflect your unique personality and sense of style.

By painting a helmet, you can transform it into something special. Do you have no idea how to paint motorcycle helmets? Our team has the necessary knowledge to help you. You can find out How to paint motorcycle helmets if you read on.

How to paint motorcycle helmets

Materials and Tools You Will Need:

  • (If you’re doing a pattern, use references and stencils)
  • Spray gun or airbrush
  • Four hundred-grit sandpaper
  • Paint that has a matte finish
  • Coat without stains
  • An undercoat of flat black primer and a glossy topcoats
  • Glue tape
  • Scrubbing pad for Scotch-Brite
  • Cutlery
  • A pair of leather gloves

Caution:

Make sure you choose paints carefully. Chemicals in some of them can damage the helmet’s material. Consider a renowned outlet because they are knowledgeable about paint and can recommend the best paint for your motorcycle helmet.

Since it is likely that paint will fall upon items around where you work, you will have to paint in a clean area. Thus, work in an empty space. The wet paint will also likely attach itself to dusty surfaces, which will result in substandard work.That is why first you have to know How to paint motorcycle helmets.

 

The steps are as follows How to paint motorcycle helmets

 

The Helmet must be disassembled

You don’t start painting the helmet immediately after getting it. Firstly, you need to separate the helmet’s removable parts. These components include screws, the lens, and the strap that goes under the rider’s chin.

Carefully remove the interlining, and then set all the pieces aside (away from the painting area to prevent paint from dripping).Should you be unable to completely remove the inner lining from the helmet, you will need to mask it before you can begin painting.

Preparation of helmets

Make sure the helmet’s surface is clean by using a basic cleaning detergent to remove grease. If you don’t want to stain the painted surface with your fingerprints, wear latex gloves. Make sure the helmet is not damaged.

The helmet can be repainted indefinitely as long as the base remains intact. If the helmet has stickers, remove them. Remove them by peeling them off. Use a hair dryer or heat gun to apply heat to the stickers and then it will be easier to remove them.

Rub the helmet with the 400-grade sand paper material to remove old paint and sticker glue. It will look bad if you don’t do this and just paint on top of the old paint. Sandpaper should be run along the grain rather than against it to achieve the best results.

Masks for helmets

Masking is necessary if you are unable to remove all of the inner lining from the helmet. Make sure that you cover the areas that do not need any paint at all with masking tape. Basically, you scrunch up some old newspapers and stuff them into the helmet. The masking tape will keep the newspaper ball from falling off.

Other Useful Articles

Best Motorcycle Helmets 2021

Motorcycle Helmet Brands To Avoid

Primers and undercoats

Work on the surface by applying an undercoat. You should take a break after applying a thin undercoat to the helmet, and you should ensure the undercoat is completely dry before moving on. When the undercoat is still wet, you should not apply your design.

Primer must be applied in two to three layers or coats. The paint will soak into the paper when you spray beyond the tape, and this will result in the base getting stained. Do not spray beyond the masking tape. Overnight, let your work (your helmet and primer) dry.

Apply a guide coat

Lightly mist the outside surface of the helmet with flat black quick coat and allow it to dry. If the guide coat hasn’t dried yet, soak 400-grit wet-and-dry sandpaper and a piece of block in warm, soapy water. The helmet should be sanded down smooth using the block with great care.

It is not yet completely smooth if some areas of the black guide coat remain black. After the primer is gone, continue sanding to disappear the entire guide coat. After you have sanded the helmet, wash it thoroughly. Wipe off any dust on the helmet with a piece of cloth dipped in wax and grease remover. This is important step to know while getting knowledge How to paint motorcycle helmets.

Artwork

Dust must first be removed from the helmet by wiping it down. Mix your paints if you are using a professional spray gun. You should shake the aerosol can before using it. Then, spray with a constant speed from a distance of an equal distance away from the painted surface.

Make sure you don’t stop midway to avoid running. You should stop spraying as you run away from the painted area, and then begin again as you come back. As you move from left to right, make sure to apply an even coat over the entire helmet. Make sure there is enough paint for 3 to 4 coats.

Let the first coat dry, then apply another until you are satisfied with it. Please note that we assume you are painting the helmet one color throughout this article. When you paint multiple colors, you have to follow extra steps.

Surface Coating

It is possible to protect while eliminating the requirement for buffing by using a clear coat. Similarly, you apply the clear coat in the same manner as the main color. The paint’s depth can be enhanced by applying up to several layers of clear-coat, followed by approximately 24 hours of drying time. Once smoothed, polish the helmet using a 1500-grade sandpaper.

Helmet Unmasking

Using a razor blade, remove the masking tape. Under the masking tape, run a clean, dry cloth. You should do this to ensure any debris is removed. Masking tape and papers should be removed slowly so that you don’t remove fresh paint.

Helmet reassembling 

Reinstall the parts you removed after the helmet has dried completely. In case of trouble, consult the owner’s manual that came with the helmet. Ensures no screws fall off while riding by tightening them all.

Final thoughts About How to paint motorcycle helmets

Now you know how to paint motorcycle helmets the right way! You can try it out today. Why not take off your helmet and express yourself in paint? Now you have complete information and procedure to How to paint motorcycle helmets. When you wear a helmet that you have painted yourself, it feels good.

Leave a Comment